Why the Magpul M-LOK Forend Is the Best Upgrade for Your Mossberg 500/590

You can upgrade from a factory Mossberg forend to a Magpul M-LOK forend because it gives you better control, durability, and modularity, making it probably one of the best upgrade options for a Mossberg 500 or 590. The Magpul forend designed especially for 12-gauge Mossberg pump-action models ticks all the boxes while not confounding your setup.

Not merely aesthetic. It's made from reinforced polymer, with a solid, ergonomic grip that feels stable when the going gets tough. The mossberg forend is relatively longer than the factory forend, thus providing a broader surface area and extended reach. Particularly when using it with a mounted light or utilizing the shotgun for protection purposes, where grip position and response time count more.

Its M-LOK slots are its main distinguishing features. Attachments like weapon lights, vertical grips, or sling mounts don't need any adapters, hacks, or custom fitting. It's the real modularity that makes your shotgun all it ought to be.

Well, the fit is snug and solid, and there is no rattle or flex at all. Not compatible with Mossberg 500/590 12-gauge models with a heat shield. And it takes a few simple steps to install-no gunsmith needed. And once on, it stays on.

What makes getting this specific Mossberg forend an intelligent purchase is that it enhances function while not coming with added weight or bulk. The reliability and simplicity of the Mossberg in structure remain intact, but it offers modern flexibility. This is one of those rare parts that improves a home-defense shotgun and also prepares it for the range, improving overall handling and making the gun feel better in use.

It's now available at Shotgun Forend. For those dead serious about their shotgun rig, this is just practically what you'd call common-sense upgrades.

Remington 870 Magpul Edition: Top Heat Shield Options Reviewed

The Remington 870 is one of the most revered pump-action shotguns in existence. Yet, if all you do is run it with factory furniture, then you are seriously missing out on performance upgrades. With the ergonomic layout of a Remington 870 Magpul forend, the grip is better, handling and accessory mounting get far easier, without messing around with the core reliability of the shotgun.

The Magpul M-LOK forend for the Remington 870 is built of a polymer-reinforced structure meant for actual use. It is more extended than the factory forearm and has front and rear hand stops to facilitate control under stress while pumping. With the addition of M-LOK slots on the sides and bottom, an instant modularity comes into play: attach a light, vertical grip, sling mount, or whatever else your setup may require. No additional brackets, no messy installations. Just functional practicality built into the forend.

Going whole-hog on the build, you would want to couple the Magpul forend with a solid Remington 870 heat shield Magpul setup to make it a complete package. While Magpul does not make a heat shield itself, what many users tend to do is combine the Magpul forend with some high-quality aftermarket heat shields, such as those made by Shockwave Technologies, so that the barrel can be fully protected without compatibility issues. Just ensure the shield you select clears the extended length of the Magpul forend.

In concert, this combination does wonders for the Remington 870 better grip, more features, and a little modernization that doesn't interfere with the shotgun's inherent ruggedness.

Whether you're setting it up for home defense, range time, or duty use, this upgrade gives improved control and options. Everything that makes the 870 great remains, but now a function that today's shooters rely on is added.

For a wide selection of the Remington 870 Magpul forend options and compatible heat shields, check out ShotgunForend.com and ShockwaveHeatShield.com.

The Simple Upgrade Your Beretta 1301 or A300 Deserves

Barrel heating is a real issue when using tactical shotguns like the Beretta A300 heat shield or 1301—especially with closure-in-training-or-defensive-use kind of stuff. Short and fast-handling with lots of heat build-up, the shotguns very much rely on a solid heat shield to keep things under check; a nice-to-have, but an absolute must. This has prompted Shockwave Technologies to come up with dedicated heat shield options for Beretta A300 heat shield and Beretta 1301 heat shield, designed and fitted for the purpose.

These heat shields, unlike the so-called universal fit options, are specifically designed for the 12-gauge Beretta with an 18.5" barrel. They are CNC machined out of 6061-T6 aluminum, hardcoat anodized, and employ a clamshell two-piece design for securing installation. No slop, no rattles, no plastic parts pretending to do metal's job-just rugged gear, made for actual service.

The Beretta 1301 heat shield fits the Tactical variant perfectly and does not interfere with any element of your sights, sling, or accessory mounts; the same goes for the A300 heat shield installation, which is easy, with no permanent modifications required. Just a low-profile, high-strength heat shield that protects your support hand and aids in consistent handling.

Many shooters overlook how fast shotgun barrel heat buildup occurs, especially when at the range. Our heat shields solve this problem without changing the weight or balance of the firearm. They afford protection, control, and great looks on-handling trueness.

If you depend on your Beretta for home defense, training, or patrol work, the simple heat shield is a high-impact add-on. It protects your hand, provides control during heavy use, and makes your shotgun look more finished and professional.

Order directly from Shockwave Heat Shield for specs and parts. It's one of the more functional upgrades available for a modern tactical shotgun.

Upgrade Your Remington 870 With A Forend That Performs

If you have a Remington 870 and are still using the factory forend, now is the time for you to seriously think about reconsidering the present setup. Whichever way you are going with the shotgun, be it a defensive shotgun, a hunting rig, or a range gun, improving the  remington forend makes a tremendous difference in the way your firearm will handle and perform.

Magpul's M-LOK remington forend 870 has got to be one of the more popular upgrades in existence, and it truly deserves it. The remington forend is made of high-strength polymer reinforced with glass fibers to offer better grip, control, and M-LOK accessory compatibility. This means you can mount lights, vertical grips, sling points, or any other gear your setup calls for, free from any bulky adapters and permanent modifications.

Installation is clean and straightforward. This forend fits models of the 12-gauge Remington 870 and features built-in front and rear hand stops to improve handling under stress. The extended length adds surface area, so the pumping action is smooth and has a secure grip—even with gloves on or wet hands.

Unlike many aftermarket remington forend, which feel unwieldy or loose, the Magpul M-LOK locks solidly and adds almost no extra weight at all. It is the right balance of functional and subtle, rugged enough for actual-use scenarios.

If you want an easy upgrade for your Remington 870, this option proves to be very wise. You get much more than a mere swap: your shotgun now features improved ergonomics, modularity, and real-world usability.

You can see full product details and order directly from Shotgun Forend. This is one of the few upgrades that instantly feels like it should have come standard from the factory.